No pump on dry land
The motor of a pump is cooled by the pumped water. It is therefore very important that a pump never runs dry. For this purpose, a level probe is installed in the well to monitor the water level for dry-running protection. The control switches the pump off as soon as a previously defined water level is reached.
Dry-running protection is the easiest way to prevent the pump from overheating. This prevents time-consuming and costly repairs.
Dry-running protection against overheating
The easiest way to prevent damage
Saves time and money on repairs
No pump on dry land
The motor of a pump is cooled by the pumped water. It is therefore very important that a pump never runs dry. For this purpose, a level probe is installed in the well to monitor the water level for dry-running protection. The control switches the pump off as soon as a previously defined water level is reached.
Dry-running protection is the easiest way to prevent the pump from overheating. This prevents time-consuming and costly repairs.
Dry-running protection against overheating
The easiest way to prevent damage
Saves time and money on repairs
Green grass and colorful flowers
Depending on the requirements, there are different conditions for operating the pump.
For example, a simple time control for the irrigation of a green area can be realized. If sensors are used for the ambient conditions, the system can react to more complex situations. The sensors provide important measurement data, for example on temperature, humidity, solar radiation, water level and other variables. Based on this data, the SPC pump controller is able to regulate the irrigation of your areas as required. In a fully networked and automated system, this is possible without manual intervention.
An area does not need to be artificially irrigated if it is already raining.
Watering your green spaces and plants as required
Consideration of all factors such as temperature, humidity and solar radiation
Automated control of the water supply
Green grass and colorful flowers
Depending on the requirements, there are different conditions for operating the pump.
For example, a simple time control for the irrigation of a green area can be realized. If sensors are used for the ambient conditions, the system can react to more complex situations. The sensors provide important measurement data, for example on temperature, humidity, solar radiation, water level and other variables. Based on this data, the SPC pump controller is able to regulate the irrigation of your areas as required. In a fully networked and automated system, this is possible without manual intervention.
An area does not need to be artificially irrigated if it is already raining.
Watering your green spaces and plants as required
Consideration of all factors such as temperature, humidity and solar radiation
Automated control of the water supply
Always pressure on the line
For extinguishing water systems or other water supplies of all kinds, it is important that there is always pressure in the pipe so that sufficient water can be drawn at all times. For this purpose, a pressure transducer continuously measures the pressure in the pipe and passes this information on to the control system.
If water is withdrawn, there is a drop in pressure, which is detected immediately. A pump is put into operation to counteract this. Thanks to speed control, the pressure is gently readjustedwithout pressure surges.
An unusually sharp drop in pressure indicates a pipe burst, which is detected immediately and a fault message is triggered immediately.
Pressure control via pressure transducer
Gentle start-up to protect pipelines and connections
Detection of pipe bursts
Always pressure on the line
For extinguishing water systems or other water supplies of all kinds, it is important that there is always pressure in the pipe so that sufficient water can be drawn at all times. For this purpose, a pressure transducer continuously measures the pressure in the pipe and passes this information on to the control system.
If water is withdrawn, there is a drop in pressure, which is detected immediately. A pump is put into operation to counteract this. Thanks to speed control, the pressure is gently readjustedwithout pressure surges.
An unusually sharp drop in pressure indicates a pipe burst, which is detected immediately and a fault message is triggered immediately.
Pressure control via pressure transducer
Gentle start-up to protect pipelines and connections
Detection of pipe bursts